Skip to main content

Pass the butter on TV

Comments

  1. At last it has made it to the tv. Good to see it. You have put much efforts in its making and now they are bearing fruit. I wish you all the best for future ventures.

    ReplyDelete

Post a Comment

Popular posts from this blog

Tutorial to assemble the passing butter robot from Rick and Morty

I hope this tutorial helps everyone assemble their passing butter robot, it would be constantly updated base on your feedback is a work in progress . so lets get started. Shopping list: Parts: 1.  RC Tank ISPY Wifi Controlled Spy With Wi-Fi 2. Towerpro SG90S Micro 3. Rubber band(is for counter weight) 4. M3 flat head screw 5. 3D printed parts http://www.thingiverse.com/thing:1878565 6. (2) 30mm wires 1 red and 1 yellow Tools: 1. soldring iron 2 glue gun 3 screw driver Taking  things apart, after removing the cover unsolder those 2 wires, we are going to connect those 2 wires to the micro servo later on. We need to remove the camera is a a bit tricky if you don't want to break anything after removing the gear box, remove this pin first. Now we need to take apart the servo motor, we would cut all the wires from the servo motor and solder the 2 wires remove from the other motor before.  after that, assemble back the servo motor and it s

3D printed pass the butter robot from Rick and Morty

This is a 3d printed version of one of my favorite TV show, I will post the solidworks and STL files and information how to assemble one of this this is just a test run, the base is from a "I-spy Mini Wireless Wifi App-control Spy Tank Rc Car"

Pick up table tennis ball robot

Pick up table tennis ball robot      This robot is designed to pick up table tennis balls and it is not a kit. I completely designed and built it for a friend who plays table tennis. The front side of the robot has an opening in the corner of the concave angle formed by the two sides. There is a rotational door in this opening, which is activated by a couple of sensors located on top of the door. When the sensors receive a signal about an object e.g. like a table tennis ball, the signal is transmitted to a servo engine which turns the rotational door in 360 degrees hitting the object inside the robot as shown in image 3 and 4. The Robot can be operated in two ways; 1) By using a remote control, which permits the user to increase or decrease the speed of the lateral wheels. 2) By activation with a chip located inside the robot, which allows the robot to move independently and in a randomly. Either way, independent movement or remote controlled movement, the robot will